Results 1 to 3 of 3

Thread: 2010 HHR VATS Question (Security Light on IPC)

  1. #1
    Tuner in Training
    Join Date
    Feb 2021
    Posts
    13

    Question 2010 HHR VATS Question (Security Light on IPC)

    Tonight I had a friend in a pinch when his HHR lost the ignition key programming and he had to be to work tonight. He uses his car for delivery for a medical drug company. I told him to pay for the two credits and I'd disable the VATS system getting it running again. Sure enough it fired right up after I disabled the VATS and programmed it.

    We noticed the Theft Light remained lit on the IPC. Is this due to the IPC not being able to communicate with the VATS system now? I told him we'd probably just have to pull the bulb. We have started it over a dozen times now with no issues.

  2. #2
    Potential Tuner Recklessrob's Avatar
    Join Date
    Mar 2021
    Location
    Southern New Hampshire
    Posts
    7
    Were you able to resolve that? If so what did you find? I saw in the software (for my 2001 S10) there are two parameters that can be
    set relating to the VATS. Did you change both or just one?

  3. #3
    Tuner in Training
    Join Date
    Feb 2021
    Posts
    13
    Quote Originally Posted by Recklessrob View Post
    Were you able to resolve that? If so what did you find? I saw in the software (for my 2001 S10) there are two parameters that can be
    set relating to the VATS. Did you change both or just one?
    He is still driving it with the security light on in the IPC. Its because the IPC is looking for something no longer programmed.