2020 Gladiator ZF8 Tow Mode

[DAVECS2]

I have a 2020 Gladiator, that I have supercharged with the Magnuson kit. I have tuned it myself and it runs great! I ended up integrating the 2019 Ram 1500 shift schedule into my transmission, which has made it a pure joy to drive on the road. The issue I have is the RAM uses a button to get into TOW/Haul mode. Unfortunately the Gladiator does not. It would be nice to engage these tables. Would there be anyway, that message could be sent to the TCM to trigger TOW Haul, like it is done on the RAM. Would it take a custom OS for the Gladiator? Or is it a simple bus message that needs to come from something like a Tazer.

[mike_ct]

Do any gladiators come with a tow/haul button from factory? Is there an option to enable in the bcm using alfaobd or JScan?

[DAVECS2]

None of them come from the factory with this button, but the jscan question is pretty much what I am asking. The tables exist just need to activate them