Hey all,
I have a set of upgraded intake cams from L&M (LINK HERE). They come with some initial tuning suggestions. The image of these are below. My issues is that I'm not exactly sure where to apply these changes.
cam_tuning.png
My hunch is that I could rescale and interpolate the suggested values to the tables below, but looking for a confirmation there. The other area I'm not sure how to apply are the suggested centerline values. The tuning suggestions seem to indicate that they are important. I don't see any location for "centerline" changes.
settings.png
If anyone has some suggestions on how I can get started, I would appreciate it!