HP Tuners Now Supports the 2019 Mercedes AMG GT 4.0L

[Darek@HPTuners]

2019 Mercedes AMG GT 4.0L Support

Introducing support for the 2019 Mercedes AMG GT 4.0L

An MPVI2 is required along with internet connection and
the cost to license the ECM is 8 credits.

• Click here to purchase an MPVI2
• Click here to download the latest version of our VCM Suite software

Mercedes

• 19 Mercedes AMG GT 4.0L

For the full VCM Editor Change Log, please see the following link:
http://www.hptuners.com/help/vcm-editor/changelog.html

For the full VCM Scanner Change Log, please see the following link:
https://www.hptuners.com/help/VCM-Sc...changelog.html


For more information, and to view the latest supported vehicles list, click here.

[tjamj78]

Darek,

Having trouble getting clarification on whether the 2019 c63S amg with the m177 engine is officially and completely supported.
If so, would you be so inclined as to provide the applicable links to the editor and scanner change logs as you did above, but in the m177 support thread.
I wholeheartedly apologize for hijacking this GT thread, and I'm grateful for HP tuners continued support of the Mercedes enthusiast community.

[StopGap]

Hi Darek,

Nothing for pre-2019 GTs? Asking BC the 16-18s are coming off factory warrantys now and owners more motivated to tune non warranty cars. Also, any factory tunes available in a library so I can begin looking at the layout?

[tjamj78]

Derek---

Circling back once again.

At this point, Is there full support for the m177 in the 2019 c63 amg cars?

[ElderRacing]

I tried to read a 2019 AMG GTR Pro. Was not able to read.

[Javier Wilde]

Can someone post a 2017 c63s stock tune?. Thanks.

[TunedByRobert]

Can someone post a 2017 c63s stock tune?. Thanks.

Here you go:

17_MB_C63_AMG.hpt

[clifftoo]

Do we have any insight to the different tuning between C63 C63S and some of the GT cars? I think there is a widespread power difference and I believe the turbo set up is very similar on those. May provide some ideas on tuning these cars better.

[ViGGeN]

Tried to read on bench with latest stable build which is VCM Editor 5.0.4. Getting error, failed to detect protocol. CmdFlash connects to the same setup and gets ident's from the pcm. Can anybody guide me what am i doing wrong?

[ViGGeN]

Tried to read on bench with latest stable build which is VCM Editor 5.0.4. Getting error, failed to detect protocol. CmdFlash connects to the same setup and gets ident's from the pcm. Can anybody guide me what am i doing wrong?

Hello? Anybody in here?