It is not possible to raise the torque above 600 Newtons. I attach two logs. PCM GPEC2A
1.hpl
2.hpl
68277172AG tun9.hpt
It is not possible to raise the torque above 600 Newtons. I attach two logs. PCM GPEC2A
1.hpl
2.hpl
68277172AG tun9.hpt
Last edited by 88nec; 04-07-2021 at 09:19 AM.
are you stating a fact or asking a question?
Calculated torque shown in the logs is a product of airflow the computer sees and the torque model in the computer. Has no correlation to actual torque the motor makes, it has no way to actually measure, its entirely a model. If you dont change the model, itll keep spitting out the same torque numbers regardless of mods.