First, I know nothing about tuning but given the situation, I'm going to learn something with your help!!! Background: I have a 2013 that had a 5.7 Hemi with a 65RFE transmission. I decided to upgrade the truck... I had a 426 Stroked Hellcat put in it with a built 8HP70 conversion... All electronics/modules/pcm/bcm/tcm/skim/RF everything OEM out of a rolled 2015 Ram 1500. Truck is a beast and has been driving flawlessly for the last 5 months... Keeping it out of limp mode has been difficult to say the least when the wheels get spinning... I'm sure you can understand that... The 2-3 upshift seems to be the problem and never seems to be a problem in any other gear upshift or downshift... I've started reading all the post as well as sticky available to become familiar with the data logging pids/channels to get this clip of a log today...I'm sure I'm in for another journey with this truck but I'm really going to need your guidance and knowledgeable help through this processes of learning HPTUNERS...
If you could/can, I've attached 1 of these events/Limp mode with the attached file...Any opinions as to what might be happening? What you might be seeing would be helpful and very much appreciated...