Results 1 to 4 of 4

Thread: Ba xr8 scanner missing a lot of pids

  1. #1
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    13

    Ba xr8 scanner missing a lot of pids

    Hey guys, currently plugged into a ba xr8 , read and write works fine but the scanner has next to no pids , no throttle percentage , no knock retard and about 20 others missing .
    Only have stft bank 1 and timing .
    Running latest stable software from hp.

  2. #2
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    1
    I have had this problem before on a BA XR6T PCM in a standalone config. When I changed the VSS to "ignore VID" I lost most scanner functions.

    Since then I have resolved a similar problem by selecting [comms>re poll for supported paramaters]

  3. #3
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    4
    im having this exact same issue

  4. #4
    Advanced Tuner 4wheelinls1's Avatar
    Join Date
    Jun 2009
    Location
    Melbourne Australia
    Posts
    283
    Always repol first however some early BA's do not automatically identify in the HP system. Support can add these, you need to know what is missing (ideally PID ID numbers) also send the Infolog, Debug, an example log ensuring you are on a current version. I have had to do this on two occasions with early BA.