removed running driving 6.0 from a 2014 2500 van, removed harness and rewired to nicely fit into a 72 c10, got everything wired up, used editor to disable VATS patch 1, VATS patch 2 and Starter fault check, wrote new tune (write entire) tried starting, turns over great but wont fire, checked power and ground at coils during cranking and have both, checked for signal, nothing, checked all wiring from ecm to coils everything is good, checked injectors with noide light, no pulse, at a loss, anyone have any ideas? has rpm of 175ish wile cranking