Blank OS tab.

[Oldwineo]

I just finished rewiring a 2014 Sierra L83/6l80 for a swap project.
I did a read vehicle/entire and started looking at turning off DOD and VATS etc.
Searching this site tells me that VATS is located in the OS tab but when I open it up it's blank. No text, buttons, anything.
The other tabs look like they are fine.

What am I doing wrong?

Ken

[Oldwineo]

I just noticed that the Trans Diag box is also empty.
Do I need to be connected to the tuner to see these?

[Higgs Boson]

I think VATS moved up to the main drop down menus. The OS box and Trans Diag box just don't apply to your applications so nothing is there.

[5FDP]

Just to rule another thing out, set the view to advanced under the edit tab. Edit > View > advanced.

[schpenxel]

Yep. That seems to cause a lot of questions...

[Oldwineo]

Thanks, advanced mode got the OS tab to show TCS Patch, VATS Patch 1 and VATS Patch 2.
Do I disable both VATS Patches to disable VATS?
I wish that the description at the bottom of the screen was more clear. Looks like this will disable an OS patch not VATS.

Ken

[schpenxel]

I believe disable = VATS is disabled. Enable = VATS is still active

[sheldon.kainz]

I believe disable = VATS is disabled. Enable = VATS is still active

Thanks for posting this. I was scratching my head trying to figure how to disable the vats on my gen v.