Please provide a way to filter out transient states. A TPS filter that could filter out data when the TPS moves x% in x amount of time would be helpful.
Please provide a way to filter out transient states. A TPS filter that could filter out data when the TPS moves x% in x amount of time would be helpful.
www.outlawpontiacdragseries.com
Come race with us in MA, PA, and VA!
2005 GTO A4 - Spintech X-pipe with Powerstick mufflers, IAT relocate, Volant, !scoops, !cowlgasket, !skid plate, LM-1, HPT2.0/MPVI Pro USB, 275x40x17 Nitto DR, rolled fenders, Pedders 2985 springs, Britax baby seat with 5 point harness.
Stock:13.36@104
Mods in sig:13.02@106.5
already on the to do list.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Yes, but WHERE on the to do list? You and I both know that their "to do" list is about eleventy-billion miles long...
which one do you want more? autotune or transitional filters? make up your mind damnit! lol
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I want both, as well as a baked potato on the side!
(a burrito wouldn't hurt either)
Don't start with the burrito's again...you already got that months ago
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I want RTT for LS2 A4 please.
What are they working on?
www.outlawpontiacdragseries.com
Come race with us in MA, PA, and VA!
2005 GTO A4 - Spintech X-pipe with Powerstick mufflers, IAT relocate, Volant, !scoops, !cowlgasket, !skid plate, LM-1, HPT2.0/MPVI Pro USB, 275x40x17 Nitto DR, rolled fenders, Pedders 2985 springs, Britax baby seat with 5 point harness.
Stock:13.36@104
Mods in sig:13.02@106.5
Just keep the Autotune on track , transitional filters n baked spuds can come in the next release
link to where this is found to implement it?Originally Posted by Bill@HPTuners
Nobody wants to hear your straight-piped V6 Camaro/Mustang/Challenger/350Z. You are not in a movie, you are not 'DK'. Everyone hates you.
man this is awesome. You have lots of knowledge i can tell.
Is there a link to where i can see what does what, or what to input?
It's different for every controller.
For filtering transitions, it's basically saying 'ignore everything 500ms before a throttle movement greater than X, and ignore everything 500ms after, too'. But which numbers make it work depends on if you're gen 3 or gen 4 or cable TB or ETC, it might even change by platform/year/OS. You just have to figure out what you want included and what you want excluded, and then go through the parameters and find what will make it do that.
Nobody wants to hear your straight-piped V6 Camaro/Mustang/Challenger/350Z. You are not in a movie, you are not 'DK'. Everyone hates you.
also if u run just the filter maths in the chart v time it will show 1 or 0 (true false) so u can overlay that with say WB data and see when its using the data or filtering it out, that way u can visually see what ur changes to filtering are doing, just set the range to -0.1 to 1.1 so u can see when its showing the 1 or 0 line
Reply With Quote