Results 1 to 13 of 13

Thread: Filter Transitions

  1. #1
    Advanced Tuner
    Join Date
    Nov 2005
    Location
    Someplace high in the Himalayas
    Posts
    770

    Filter Transitions

    Please provide a way to filter out transient states. A TPS filter that could filter out data when the TPS moves x% in x amount of time would be helpful.
    www.outlawpontiacdragseries.com
    Come race with us in MA, PA, and VA!

    2005 GTO A4 - Spintech X-pipe with Powerstick mufflers, IAT relocate, Volant, !scoops, !cowlgasket, !skid plate, LM-1, HPT2.0/MPVI Pro USB, 275x40x17 Nitto DR, rolled fenders, Pedders 2985 springs, Britax baby seat with 5 point harness.
    Stock:13.36@104
    Mods in sig:[email protected]

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    already on the to do list.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Señor Tuner MeentSS02's Avatar
    Join Date
    Jun 2005
    Location
    Dayton, OH
    Posts
    1,132
    Yes, but WHERE on the to do list? You and I both know that their "to do" list is about eleventy-billion miles long...
    2008 Viper - now with HPToona - 1/4 Mile Shenanigans Here
    11.02 @ 130

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    which one do you want more? autotune or transitional filters? make up your mind damnit! lol
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Señor Tuner MeentSS02's Avatar
    Join Date
    Jun 2005
    Location
    Dayton, OH
    Posts
    1,132
    I want both, as well as a baked potato on the side!



    (a burrito wouldn't hurt either)
    2008 Viper - now with HPToona - 1/4 Mile Shenanigans Here
    11.02 @ 130

  6. #6
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Don't start with the burrito's again...you already got that months ago
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  7. #7
    Advanced Tuner
    Join Date
    Nov 2005
    Location
    Someplace high in the Himalayas
    Posts
    770
    I want RTT for LS2 A4 please.

    What are they working on?
    www.outlawpontiacdragseries.com
    Come race with us in MA, PA, and VA!

    2005 GTO A4 - Spintech X-pipe with Powerstick mufflers, IAT relocate, Volant, !scoops, !cowlgasket, !skid plate, LM-1, HPT2.0/MPVI Pro USB, 275x40x17 Nitto DR, rolled fenders, Pedders 2985 springs, Britax baby seat with 5 point harness.
    Stock:13.36@104
    Mods in sig:[email protected]

  8. #8
    Just keep the Autotune on track , transitional filters n baked spuds can come in the next release

  9. #9
    Advanced Tuner
    Join Date
    Jan 2015
    Location
    Arizona
    Posts
    406
    Quote Originally Posted by Bill@HPTuners View Post
    already on the to do list.
    link to where this is found to implement it?

  10. #10

  11. #11
    Advanced Tuner
    Join Date
    Jan 2015
    Location
    Arizona
    Posts
    406
    Quote Originally Posted by blindsquirrel View Post
    man this is awesome. You have lots of knowledge i can tell.
    Is there a link to where i can see what does what, or what to input?

  12. #12
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,450
    It's different for every controller.

    For filtering transitions, it's basically saying 'ignore everything 500ms before a throttle movement greater than X, and ignore everything 500ms after, too'. But which numbers make it work depends on if you're gen 3 or gen 4 or cable TB or ETC, it might even change by platform/year/OS. You just have to figure out what you want included and what you want excluded, and then go through the parameters and find what will make it do that.

  13. #13
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,970
    also if u run just the filter maths in the chart v time it will show 1 or 0 (true false) so u can overlay that with say WB data and see when its using the data or filtering it out, that way u can visually see what ur changes to filtering are doing, just set the range to -0.1 to 1.1 so u can see when its showing the 1 or 0 line