Results 1 to 4 of 4

Thread: VCM Suite - RPM going stale with Pro-Link?

  1. #1

    VCM Suite - RPM going stale with Pro-Link?

    Is anyone else experiencing issues where the RPM readout will freeze for a few seconds during logging then come back online?

    I have just notcied this since starting to use the Pro-Link input rather than hooking up my wideband to serial port on the laptop, if so any workaround to help speed it up? Such as sample rate etc

    I am logging 25 PIDs currently which I know is nearing the max but this hasn't changed since moving from serial to the link

  2. #2
    No takers on this?

    As an update I hit 5000rpm on a few shifts today yet VCM had frozen out the RPM at 2400 max.......so lost all that data! Which is shit

    I have since ordered another serial port connector to solder to the AEM 30-0300 and log via USB C, will see if this fixes it. Unsure if it is a glitch with the beta software or a new thing that should be noted when trying to log a gen 3 using pro link ?

  3. #3
    For anyone interested, swapped back to serial today after making a new cable and the problem is gone. RPM reads perfectly all through logging

  4. #4
    Senior Tuner 10_SS's Avatar
    Join Date
    Mar 2012
    Location
    Detroit, MI
    Posts
    1,320
    Quote Originally Posted by South Lakes Speed Shop View Post
    For anyone interested, swapped back to serial today after making a new cable and the problem is gone. RPM reads perfectly all through logging
    send this to support, they will look into it that way.
    2010 Camaro LS3 (E38 ECU - Spark only). MS3X running complete RTT fuel control (wideband).
    Whipple 2.9L, 3.875" Pulley, kit injectors, supplied MSD Boost-A-Pump, stock pump
    LG Motorsports 1 7/8" Headers - No Cats, stock mid pipe with JBA Axle Back
    ZL1 Wheels/Tires