Tune and log files attached. Going lean/rich/lean with each upshift. And goes rich on deceleration. Any other issues that you see? 2000 M6 Corvette with cam, CAI, LT's, FAST 36 lb injectors. Where do I look for resolution. VE table? Minimum injector pulse width? Minimum Fuel Milligrams? Thanks for your ideas.
DFCO has been disabled. That will cause the rich condition on decel. The cruise portion of the datalog looks mostly normal.
Thanks Kevin. Yes, DFCO could be used to cut fuel aggressively by adjusting MAP and RPM enter/exit levels. I was hoping for a more elegant solution? I am intrigued by your "mostly normal" comment - what looks off to you?