Results 1 to 4 of 4

Thread: 2020 edge st line 2.0 won?t read entire

  1. #1
    Potential Tuner
    Join Date
    Nov 2014
    Posts
    9

    2020 edge st line 2.0 won?t read entire

    I can?t get my mpvi 2 to read entire unless I select a hardware. And I don?t no where to find the info on what hardware it has. I found one titled tc-298 b. 2019+Ford

  2. #2
    Potential Tuner
    Join Date
    Nov 2014
    Posts
    9
    But that was not it

  3. #3
    Potential Tuner
    Join Date
    Feb 2008
    Posts
    2
    Have the same vehicle. After pulling the ECU I had success (read only-NO view) the stock file using VCM BETA software- gather info and selecting " TC-298 B, 2019+ Ford". NOTE I have a open support ticket...Support has responded they cannot provide an ETA regarding VCM software update allowing us to view\use the stock file.

    VCM Log Info:
    ECM: 7E8, CAN, PCM -PowertrainCtrl
    VIN: - 2020 Ford Edge SEL, 2.0 L, I4
    Calibration IDs: CKMP59T.H32
    Calibration VNs: 48E96C2B

  4. #4
    Potential Tuner
    Join Date
    Nov 2014
    Posts
    9
    I opened a ticket I can read it now but after editing tune I get checksum failure unable to save file