Need Help on 2016 Procharged SS

[CAMARO416]

Kinda new to tuning this platform. Car is an A8, headers, and P1X Procharged and using a canned Procharger tune as a base to get started but the knock exceeds 9 degrees and we're on the dyno making only 530whp. Attached the log/tune any help to finding what's causing the excessive knock would be awesome! Full throttle fueling is on target 12.5AFR


JCARBYDynologP1X.hplJCARBYPROCHARGEDinprogress.hpt

[SultanHassanMasTuning]

you will need correct map sensor to read boost and breakout harness

also fuel pressure not logged

[CAMARO416]

you will need correct map sensor to read boost and breakout harness

also fuel pressure not logged

Hey thanks for the reply. I'm hoping for an answer related to the knock sensors. I'm watching boost with the dynojet and fueling is steady at 12.5 staying on target. I'm new to the torque tables and as of right now they are stock. Just wondering if you could point me in the right direction with if it's in the torque management side of things or the VT settings. I'm confident it's false knock and I know this subject comes up a lot but just haven't found a clear answer yet!

[SultanHassanMasTuning]

your torque model is off,