Hey all, been out of this for a little bit (never was real good at it period) but i cant figure out why this crate engine will start and then die like the vats need fixed. I cannot find the vats in the ecu at all. E67 Factory Crate LS3 525hp.hpt . This is the factory tune with no changes. Any help would be greatly appreciated.
Check MAF position, direction, and datalog for flow.
This is usually the problem we have had with customers and those systems.
-Greg
2009 Maverick Silver G8 GXP M6 - 586hp
Engine Mods: TVS 2300 Magnacharger ARH 1 7/8" long tubes with catted x-pipe
Drivetrain Mods: Ram Dual Disc Clutch
Suspension Mods: Pedders/Wretched basic drag pack - BMR trailing arms
Misc Mods: Jamesbiz Catch can - GRRRR8 Heater hose relo kit
Thank you for your help! I will look into that and see how/where it has been installed
Reply With Quote