Results 1 to 2 of 2

Thread: 2013 Ford Interceptor Utility Tune

  1. #1
    Tuner in Training
    Join Date
    Dec 2020
    Posts
    18

    2013 Ford Interceptor Utility Tune

    Anyone done tuning on these vehicles? It seems like the options for the transmission are very limited.

  2. #2
    Advanced Tuner
    Join Date
    Mar 2010
    Location
    New Orleans, LA
    Posts
    630
    There isnt much you can do with them performance wise as most PDs get crap fuel if they are supplied. Most of the PDs in my area get 83 octane.

    Usually just make the shifting more in line with pursuit mode and remove all limiters. I find they are clunky so I decay rpms slower for much smoother dashpot. They also have borderline voltage reserve at idle so I kick up the idle a touch, turn the fan on sooner and kick up the voltage ppm adder so rpms dont drop so far when a voltage load hits.

    When I messed with them no one had support so I had to break out my own parameters with tunerpro. I have no idea what hp gives you access to but there isnt much u need trans wise.