I know of two people who are successfully doing this. The issue is they aren't tuners and cannot tell me what the tune settings are for the new MAP. They said their tuners input the sensor's information and the only place I can see to change this is the characteristics Engine>Airflow>General
321.JPG
Here is the parts list:
AEM 50psi/3.5 bar pressure sensor
Casper's harness to convert LS3 to AEM sensor
MAP sensor adapter
Here are the stock settings for an E67:
stock MAP.JPG
Here are the settings I generated using the DSX transfer function generator:
852.JPG
The chart used for the numbers is in the first link to the AEM pressure sensor but here it is again:
aem2.JPG
Are my numbers correct?