Gen V Cam and DOD delete + torque converter swap.

[RLANE11]

Hello tuners, I'm new to HP Tuning so I maybe a little slow to start off. I recently performed a cam swap "Texas Speed VVT1" and DOD delete kit on my 2014 GMC Sierra 6.2L. I also replaced the exhaust from headers back, with Texas Speed high flow cats and muffler. While the engine was out I replaced my failing torque converter with a Circle D 2600-2800 stall converter. I just bought an HP tuner from a friend and about to buy the 2 credits I need to get going. I know to log some data with the scanner, but then I will need some help with reading the tables and dialing in the torque. Also, I need to bump up transmission pressure for my new converter if someone can help with that as well. I daily drive this truck, and occasionally pull an 18' trailer with my drag truck on it. Thanks in advance.

[SILV]

Post your current tune. I can probably look at it if you get it posted today. I have to go out of town tomorrow for a few weeks.

[1BadSlug]

Post your stock tune file.

[RLANE11]

https://mail.google.com/mail/u/0?ui=...=att&disp=safe

[RLANE11]

Let me know if the file posted correctly.

[SILV]

No that didn't work. You need use the "go advanced" tab and upload your files.