Results 1 to 4 of 4

Thread: VQ37 Turbo A/F Sensors.

  1. #1
    Tuner in Training
    Join Date
    Jan 2021
    Posts
    26

    VQ37 Turbo A/F Sensors.

    Hey Fellas

    I have a VQ37 Single Turbo and both A/F sensors are in the one down pipe. Having erratic issues with one bank trimming way more than the other. Basically fighting each other. Has anyone dealt with this issue before. Any easy fix? I know in other ECUs you can nominate which 02s the ECU utilises for feedback.

  2. #2
    Tuner in Training
    Join Date
    Nov 2020
    Posts
    31
    Why are they in one bank? Seems counter productive especially on one of these engines. I'm running a single turbo as well, a/f sensors in the stock manifolds, no problems so far. Genuinely curious.

  3. #3
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    if you have widebands, just openloop the car and tune that way.

    dont rely on stock sensors for boost
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  4. #4
    Tuner in Training
    Join Date
    Jan 2021
    Posts
    26
    Engine is running VQ30 manifolds on the VQ37 so there is no facilities for sensors in factory location. It does have an aftermarket wideband with a LSU 4.9 for on boost control. Only reason I want to keep the factory sensors happy is for closed loop under cruise - fuel economy.