Results 1 to 3 of 3

Thread: 1996 K2500 Swap with a 0411 PCM

  1. #1
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    6

    1996 K2500 Swap with a 0411 PCM

    Anything in particular I should look for in picking up a 2001 to 2004 0411 P c m And who can handle the reprogramming? I've looked in Houston and nobody does any work On the older Chevy trucks

  2. #2
    Tuner in Training
    Join Date
    Jun 2021
    Location
    Texas
    Posts
    29
    I think I saw you in another post what are you looking for from the tune?

  3. #3
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    6
    I have a motor built by G&G Tomball TX, 480 x488 comp cam, 10.1 compression, throttle spacer, bored throttle body, cold air, basic performance. When I started this project and I'm an old guy back in 2012 came down with cancer and it sat and I didn't research it the 96PC mus not tunable. Headers and things are going on at So it runs like it should. Put the motor in it it turned over on the 1st kick it runs OK but it's burning fuel It does have an upgraded fuel Spider. I don't have a lot of time to spend in this big city of Houston nobody knows how to tune this thing I've called everyone performance shop. Advice would be greatly appreciated and thanks for a reply