Results 1 to 11 of 11

Thread: 5.9 Magnum Gas Dodge Ram Tuning and Tire Size Change

  1. #1
    Potential Tuner
    Join Date
    Mar 2021
    Posts
    1

    5.9 Magnum Gas Dodge Ram Tuning and Tire Size Change

    looking for some tune files for dodge magnum 5.9 360ci gas engine

  2. #2
    Tuner in Training 14HemiRam's Avatar
    Join Date
    May 2020
    Location
    Oklahoma City, OK
    Posts
    21
    Have you come across any? Anyway you could share you stock file my son has a 96 Ram 360 and was wanting to check out what all can be tuned. Thanks

  3. #3
    Tuner in Training
    Join Date
    Jun 2021
    Location
    Savannah, Ga
    Posts
    15
    i have a 2001 Durango 5.9 file 2001 Durango RT David.hpt

  4. #4
    Tuner in Training jimmyZJ's Avatar
    Join Date
    Apr 2021
    Posts
    15
    I'm tuning zj 5.9 for E85
    98 ZJ 5.9 and Dodge Ram 5.9 have very different calibration file, fuel & timing

  5. #5
    Potential Tuner
    Join Date
    Jan 2022
    Posts
    6

    have you found a tune yet?

    Quote Originally Posted by rmcleod View Post
    looking for some tune files for dodge magnum 5.9 360ci gas engine
    have you found a tune yet?

  6. #6
    im trying to find a way possible to adjust tire size / speedo with jtec+. doesn't seem to be a way in HPT
    2000 Dakota R/T
    gt45
    42lb
    honda map
    10psi

  7. #7
    Tuner in Training
    Join Date
    Jan 2022
    Posts
    10
    Here's a 5.9 magnum base tune
    01ram59.hpt

    I'm also looking for a way to calibrate the speedo. I tried the "controls and special functions" in VCM scanner but it's just blank. Seems the answer is it's not supported on our vehicles. What are our options for changing speedo for new tire size?

  8. #8
    Tuner in Training
    Join Date
    Aug 2021
    Location
    Akron, OH
    Posts
    37
    Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.

  9. #9
    Quote Originally Posted by putts000 View Post
    Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.
    damn.
    2000 Dakota R/T
    gt45
    42lb
    honda map
    10psi

  10. #10
    Quote Originally Posted by putts000 View Post
    Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.
    I have a Solus Pro that uses keys, can I adjust the ABS module with it? Does the Solus Edge use keys?

  11. #11
    Potential Tuner
    Join Date
    Dec 2023
    Location
    Las Vegas
    Posts
    1
    i Replaced my ECu and i have no idea where to get a stock tune for my 02/03 ram with 5.9 magnum
    there is no stock tune in repository ?? help plz