I swapped to ID1300 and entered the GM data from ID website. Now running super rich. See attached logs before and after.
1st Flex fuel log with 42lb injectors.hpl - Before Swap
1st Flex fuel log with ID1300 injectors.hpl - After Swap
Tried adjusting VE table and the errors didn't get any better. See before change after change below:
Steps where
E36 2002 Taho Flex 2Bar_ID1300_SD_VE OL Tuning_Base.hpt - Flashed this tune
VE Tuning Log2.hpl - Logged
E36 2002 Taho Flex 2Bar_ID1300_SD_VE OL Tuning_log3.hpt - Copy pasted % multiply by then flashed tune
VE Tuning Log_2-3_ve change.hpl - Logged
It doesn't appear to me that anything got better or worse, and it pretty much stayed the same. I did interpolate and smooth.
Any thoughts?