Results 1 to 5 of 5

Thread: C7 Z06 Corvette driver demand table missing?

  1. #1
    Potential Tuner
    Join Date
    Oct 2017
    Posts
    3

    C7 Z06 Corvette driver demand table missing?

    I have searched the forum and tried poking around for a couple hours. I cannot find my driver demand table, which is supposed to be under Engine > Torque Management > General. I have seen several YouTube videos, and the pedal adjustment always seems to be in this area - yet for my Corvette it is not.

    This is an MPVI-1 Pro, licensed to my car using 2 credits and I don't use it on anything else. In fact I have only used it for programming the thermostat setting.

    I figure one of 3 things is happening.
    1) I need more credits for full C7 LT4 access
    2) This field is somewhere else and I am somehow not seeing it
    3) HP Tuners has not figured out how to edit this field or its not in the base ECU (???)

  2. #2

  3. #3
    Potential Tuner
    Join Date
    Oct 2017
    Posts
    3
    Mystery solved. I installed this on another PC Laptop and enabled advanced view/options, and now I see it. I don't see a toggle within the program but, that would be nice to have.

  4. #4
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    2,776
    I honestly wish there was no basic view and only advance… you’d be surprised how often this comes up

    Email Tunes, Bencharles_10@hotmail.com
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  5. #5
    Potential Tuner
    Join Date
    Jul 2021
    Posts
    3
    Quote Originally Posted by Dr.Mudge View Post
    Thanks for sharing