Thoughts on Ilde

[Ghostnotes]

I only get a short time when I'm home to mess with my C7/M7 but would like some criticism on the idle i have. This has LTH large cam and YSi-V7,head work. I see that the trims look good, Starts and falls into idle without surging, Timing looks ok but would like a pro to look at it in general.



Thanks.

[SultanHassanMasTuning]

seems like your High pressure pump is a lttle lower than normal

as you can see its requesting 400-500 psi but only seeing about half

could be issue with the install and the lash clearance

[Ghostnotes]

Never realized that, it keeps up during high pressure demand. There is no lash, It's just 10% over lobe. Was told and read at 10% you don't need a lash cap, but that was 2-3 years ago. Only thing I did was re-span the columns per the Banish DVD. Wouldn't think that would matter.

[sevinn]

seems like your High pressure pump is a lttle lower than normal

as you can see its requesting 400-500 psi but only seeing about half

could be issue with the install and the lash clearance

This is because of his "fuel rail pressure relative" and/or "fuel pressure estimated pids. It's logging 0 so in the charts he's getting the average between actual and 0. Just remove that pid.