Please advise, for Dodge Hemi engines 6.4/6.2 (GPEC2A PCM) to which PCM pin need to connect Ethanol sensor signal wire so ECU could use it for Flex Fuel blend?
Please advise, for Dodge Hemi engines 6.4/6.2 (GPEC2A PCM) to which PCM pin need to connect Ethanol sensor signal wire so ECU could use it for Flex Fuel blend?
None of them. It has no input from a flex fuel sensor.
Just checked all the PINS on my 2015 HC and did not see any pins that can be reused for that purpose.
Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).
https://youtube.com/user/fumanchu182