Results 1 to 2 of 2

Thread: engine underload get really high stft, need help correcting

  1. #1
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    3

    engine underload get really high stft, need help correcting

    i have and lq4 4l80 i just swapped into my 1987 c10 and i got it up and going and i have driven it over 100 miles with no issues, but now it seemed like it had a miss so i hooked up the vcm scanner and my stft were going crazy crzy high when i put the engine under load. its got speed engineering mid headers with a 3 to x pipe to 2 straight through mufflers. i can upload my log file but any help would be appericated!!21-07-24 16-53-52.hpl

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,564
    Check for exhaust leaks by the o2 sensors and check your fuel pressure.

    Checking for vacuum leaks too would be a good idea as well.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.