^^^^^^^^^
^^^^^^^^^
-nope, and its not on the roadmap at this point.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I use Tuner Cat for the 1996-1997 LT1's. But new customers have to buy the program from Jet.
Russ Kemp
what scanning software do you use with it? I know hptuners only scans generic parameters from LT1's which Is why I stopped tuning them...it was either invest in another scanner & be swapping back and forth between 3 cables more then likely or just stop tuning them, I chose option 2 lol.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Not sure about Russ, but I use Datamaster. And yes, it is quite annoying to swap between tuning cable and the scanning cable.
I use the Hp Tuner scanner & cable with custom histograms to scan the LT1's and 1998 -2000 Vortec trucks. But like you said there are only generic parameters for these vehicles. But the AFR will display in the VE histogram. I only do SD tunes on there vehicles since there is no pid for maf freq.Originally Posted by foff667
Russ Kemp
yeah no knock retard, no commanded afr, etc...and considering their commanded afr is a little "odd" to figure out it makes it that much tougher lol.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
thanks guys
You got that right! I'd much rather tune with Hp Tuner's. Monodax has a scanner available (Mxscan) that has an interface to hook up a wideband, but it is not compatible with the 1996-1997 Vortec trucks. They have been working on this for more than a year.Originally Posted by foff667
Russ Kemp