Results 1 to 4 of 4

Thread: Newbie question

  1. #1
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    1

    Newbie question

    Hello everyone, I previously tuned my own truck with the SCT pro racer software. My question is I have a tune that I am running on my truck that is written with the SCT and I am wondering if I can read my file using the Hptuners software with the truck still tuned and make small changes with the Hp Tuners software? I'm looking forward to learning the HP stuff. Thanks

  2. #2
    providing its not locked then yes you will

  3. #3
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    4
    Yes you can, I?ve done it, on the 6.0, 6.4 and 6.7?s

  4. #4
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    4
    I like to go in and clean up the tcc pressure. (Line pressure during shifts) a lot of tuners turn the line pressure to max during shifts to reduce slippage but it makes for nasty hard shifts unloaded. So I build them a street tune with the line pressure smoothed out a little.