I put a stock cable throttle 5.3 in a 66 ford f500, attached to the 4spd manual. I switched off vats, a bunch of the dtcs and changed the transmission setting to manual.
I do not have o2's hooked up yet or a vss, I have three dtcs. One for each o2 and not connected indicator lamp.
Tps is functioning according to scanner
Fuel pressure is steady at 60psi
It seems to idle ok, but it doesn't respond to the throttle right. It will rev up a small amount on initial hit then it's like the fuel cuts and it goes back to idle.
Any tips on where to look first?
Thanks