Results 1 to 19 of 19

Thread: 2012 Commander 1000

  1. #1
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18

    2012 Commander 1000

    Received my cable today only to have it fail to read. I am using beta, version 4.11.200. The normal version of VCM editor will not talk to it at all. When I use beta it will at least recognize the vehicle. The operating system is V7E5122RB1RHS. In the hardware drop down there are only two options (both appear to be the same, but one has spaces in the name) and they both fail when trying to read. When you select one there is an "internet" option that pops up but it doesn't appear to do anything either. Has anyone had success with getting a read on a Commander?

  2. #2
    Tuner in Training
    Join Date
    Oct 2014
    Posts
    10
    Same here. Reads fail. It?s a 2021 commander xmr HD10. I rolled back to 4.11.179. They had problems with the 4.11.250. I can open a file someone posted here but cannot read. Or scan. It only polls my external wide band. Guess it?s still new.

  3. #3
    Advanced Tuner
    Join Date
    Jul 2017
    Posts
    529
    Most likely they do not have the stock file to load.
    I have a .bin for the 2021 Commander 1000, if you can get them to convert it for you, just read it yesterday.

  4. #4
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by MRRPMBRP View Post
    Most likely they do not have the stock file to load.
    I have a .bin for the 2021 Commander 1000, if you can get them to convert it for you, just read it yesterday.
    I sent you a PM. Thank you.
    Last edited by SPFord; 08-26-2021 at 12:23 PM.

  5. #5
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by Jmudfish View Post
    Same here. Reads fail. It?s a 2021 commander xmr HD10. I rolled back to 4.11.179. They had problems with the 4.11.250. I can open a file someone posted here but cannot read. Or scan. It only polls my external wide band. Guess it?s still new.
    I was able to open the file that was posted in the other thread as well.

  6. #6
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by Jmudfish View Post
    Same here. Reads fail. It?s a 2021 commander xmr HD10. I rolled back to 4.11.179. They had problems with the 4.11.250. I can open a file someone posted here but cannot read. Or scan. It only polls my external wide band. Guess it?s still new.
    We likely have not seen your file before. Email support with an infolog and we can work on getting it added.
    Eric Brooks
    HP Tuners, LLC

  7. #7
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    I contacted support yesterday and heard back early this afternoon. I submitted the infolog and debug file as requested along with screen shots of the failed reads that were requested.

  8. #8
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Went through the support chain, they elevated the issue. Ticket 21569

  9. #9
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by SPFord View Post
    Went through the support chain, they elevated the issue. Ticket 21569
    Its assigned to an engineer. Should have you going soon.
    Eric Brooks
    HP Tuners, LLC

  10. #10
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by Eric@HPTuners View Post
    Its assigned to an engineer. Should have you going soon.
    Thank you for the update Eric!

  11. #11
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by Eric@HPTuners View Post
    Its assigned to an engineer. Should have you going soon.
    Sent the computer to engineering yesterday as requested.

  12. #12
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    I reinstalled the computer over the weekend and it communicates as it should. I got the "you are viewing a stock file" disclaimer as mentioned in the tips thread. I haven't poked around too much yet, but I did find some of the tables that I was looking for.
    I am still searching for the "sport mode" tables if anyone knows what they are called in the software.

  13. #13
    Advanced Tuner
    Join Date
    Jul 2017
    Posts
    529
    Quote Originally Posted by SPFord View Post
    I reinstalled the computer over the weekend and it communicates as it should. I got the "you are viewing a stock file" disclaimer as mentioned in the tips thread. I haven't poked around too much yet, but I did find some of the tables that I was looking for.
    I am still searching for the "sport mode" tables if anyone knows what they are called in the software.
    Here's a Maverick, Tq management, Driver Demand, pedal follower

  14. #14
    Tuner in Training
    Join Date
    Mar 2011
    Location
    San Luis Son Mexico
    Posts
    43
    Can you upload the stock file for 2012 commander
    86 Chevy C10 4x4 shortbed cammed port and polished heads 5.3 DBW sitting on 35x12.5 r15 km2 muds 350 tranny currently at body shop runs 5s on sand drags

    Bagged 77 Chevy custom deluxe stock 4.8 4l60 tranny mirror black paint sitting on 20 inch rims runs 8s on 1/8 mile
    MY RACING TOYS MR MAGOO THE TRUCK GUY

  15. #15
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by RACINGVORTEC5.3 View Post
    Can you upload the stock file for 2012 commander
    I can upload one this evening.
    Last edited by SPFord; 03-24-2023 at 05:30 AM.

  16. #16
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by MRRPMBRP View Post
    Here's a Maverick, Tq management, Driver Demand, pedal follower
    I have been away for a bit, it looks like the file is gone. Can you please repost? I haven't touched the machine since my last posting due to some life events but plan to soon. Thank you!
    Last edited by SPFord; 03-24-2023 at 05:29 AM.

  17. #17
    Tuner in Training
    Join Date
    Mar 2011
    Location
    San Luis Son Mexico
    Posts
    43
    Thanks

  18. #18
    Tuner in Training
    Join Date
    Mar 2011
    Location
    San Luis Son Mexico
    Posts
    43
    The reason I need the file is my ecu went bad I got a hold of a 2014 ecu and i need to flash it with a 2011 or 2012 file,or travel out of town to get it flashed trying to save some money and flash it my self thanks for your time in advance
    86 Chevy C10 4x4 shortbed cammed port and polished heads 5.3 DBW sitting on 35x12.5 r15 km2 muds 350 tranny currently at body shop runs 5s on sand drags

    Bagged 77 Chevy custom deluxe stock 4.8 4l60 tranny mirror black paint sitting on 20 inch rims runs 8s on 1/8 mile
    MY RACING TOYS MR MAGOO THE TRUCK GUY

  19. #19
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by RACINGVORTEC5.3 View Post
    The reason I need the file is my ecu went bad I got a hold of a 2014 ecu and i need to flash it with a 2011 or 2012 file,or travel out of town to get it flashed trying to save some money and flash it my self thanks for your time in advance
    Sorry for the delay. I hope this helps!
    Attached Files Attached Files