Results 1 to 4 of 4

Thread: Misfires at engine loads above base tables

  1. #1
    Tuner in Training
    Join Date
    Apr 2021
    Location
    MD
    Posts
    49

    Misfires at engine loads above base tables

    I?m getting misfires here and there (found via logging not picked up by cel) with loads greater than base tables but less than optimum, like 185 190.

    On other cars I?ve helped tune these haven?t come up even with loads beyond optimum tables.

    They show up on random cylinders. I have about 20k miles on oem mb sparks. I haven?t upped inj pulse and similar but have increase fuel rail pressure to 20.55 and fueling under power enrichment and component protection.

  2. #2
    Advanced Tuner outlaw_50's Avatar
    Join Date
    Nov 2020
    Location
    United Arab Emirates, AlAin
    Posts
    204
    flash stock file and check if they're still their, check coils and harness
    Xstages Motorsport

    Tuning inquiries:

    ECU, TCU, CPC Online Tuning
    Whatsapp: +971503383340
    Email: [email protected]
    Insta: @xstages.motorsport
    www.xstages.com

  3. #3
    Tuner in Training
    Join Date
    Apr 2021
    Location
    MD
    Posts
    49
    thanks sir. I added more fuel and changed the 240 degree max desired load to match base table max (179), and the 211 degree max desired load I set at optimum table max (190). this resolved the issue.

  4. #4
    Advanced Tuner outlaw_50's Avatar
    Join Date
    Nov 2020
    Location
    United Arab Emirates, AlAin
    Posts
    204
    good to hear