Results 1 to 4 of 4

Thread: Dod Delete 2010 5.3

  1. #1
    Potential Tuner
    Join Date
    Oct 2014
    Location
    Texas
    Posts
    2

    Dod Delete 2010 5.3

    I have just finished a dod delete on 2010 silverado 5.3
    Complete dod delete kit with new ls3 non dod camshaft.
    The problem im having is I have turned to no error reported 10, 11, 3400s but still getting the codes and it starts missing at idle. you can plug in the old cover and it clears up.
    Trouble Codes:
    P0106 - Manifold Absolute Pressure/BARO Sensor Range/Performance (Permanent)
    P0011 - Intake (A) Camshaft Position Timing - Over-Advanced (Bank 1) (Permanent)
    P3401 (Permanent)
    P3425 (Permanent)
    Im sure im missing something but need help finding it.
    2010 silverado update.hpt
    Last edited by slambo; 09-13-2021 at 01:07 PM.

  2. #2
    Senior Tuner
    Join Date
    Mar 2011
    Location
    Ripley, MS
    Posts
    1,865
    Those are permanent codes, and aren't current codes. No need to be concerned with them.

    You'll need to disable the DOD in the tune and it'll run on all 8 cylinders.

  3. #3
    Senior Tuner Lakegoat's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    1,424
    Go to Engine---Fuel---Fuel saving---and set DOD to disable
    2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
    2013 Silverado 5.3, 6L80k 8.8

  4. #4
    Potential Tuner
    Join Date
    Oct 2014
    Location
    Texas
    Posts
    2
    Thanks guys. I had thought it was turned off, but realized i didnt.