Results 1 to 3 of 3

Thread: Intake CAM Angle Question

  1. 09-15-2021 #1
    rkuper82
    rkuper82 is offline
    Tuner in Training
    Join Date
    Aug 2020
    Posts
    20

    Intake CAM Angle Question

    I am curious about the Intake CAM Angle PID. You can see from the screen shots I have the desired angle to start phasing 1* around 5200RPM and step up from there to 4* per the cam vendors recommendation. This looks accurate when I go to log. However I am seeing data in the 400, 800, 4400 & 4800 RPM where it should be 0. Do I have my table setup wrong in vcm Scanner? maybe bump the hit factor up to 5? or is this normal?



    CAMposTable.PNGCAMposTableLog.PNG
    Reply With Quote Reply With Quote
  2. 09-15-2021 #2
    2xLS1
    2xLS1 is offline
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,315
    There are 3 tables. Are they all set the same?
    Reply With Quote Reply With Quote
  3. 09-15-2021 #3
    rkuper82
    rkuper82 is offline
    Tuner in Training
    Join Date
    Aug 2020
    Posts
    20
    Quote Originally Posted by 2xLS1 View Post
    There are 3 tables. Are they all set the same?
    Yes all three tables are the same.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »