Can anyone please tell how to set the scanner up to figure the EQ error? I have setup the graph using the EQ error math in lambda. The mass in hz is in the pid the EQ is in the pid the commanded is in the pid the wide band is in the pid but the graph will not chart the percent the maf is off. Thanks
Do you have the commanded EQ ratio channel in the main channels list?
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Yes, I double checked it is setup in the channel list.
Reply With Quote