-
Tuner in Training
AEM 30-0334 Freeze during logging?
Hi all, I'm having some issues w/ logging my wideband..
I'm trying to log my 30-0334 AEM wideband via analog w/ HPTuners. Everything is setup correctly (as far as I can tell). I'm running the most recent version of HPT. I have resynced etc -- I have the Pro feature set etc..
The PID is setup as External sensors -> MPVI2 -> analog 1
I have the transform setup as Oxygen sensor -> EQ -> AEM 30-(03x0 etc)
When I hit connect to vehicle and then start recording, the PID reads the same as the gauge itself. All good here!
As soon as i start the car, the PID freezes at that value and never changes..
Meanwhile, the gauge continues to function properly...
any ideas??? Thanks a ton! Been searching for a while - cant seem to find anything other than this..:
https://forum.hptuners.com/showthrea...g-input-wiring
Jason
-
Tuner in Training
So apparently I'm not that bright, or no one else has done this.
The solution is to start recording after the vehicle is running..
Lol
-
Advanced Tuner
In that vein, DO NOT start the car, once the sensor has gone through the HEAT cycle. That is how you kill WB sensors.