Hello everyone, I know more about tuning NA cars, but in BOOST tuning I know little, I've done a lot of research in other topics and the things that I found and know I will put the differences between My stock NA tune, And after installing the Procharger Tune:
1- Installing New map sensor (2BAR)
2- Changing the OS to 2 BAR
3- Decreasing the Timing on the spark table 1 degree to 1 psi
4- Increasing the VE table ( going for SD Tune)
5- Editing the Power and Boost Enrichment Tables
6- Installing new injectors 50lb, and editing the Injector Data (Before was 32lb injectors)
so let me guys know if there is any problem with my tune or something is wrong
Mod list:
GM Sierra 6.0 (Forged LQ9 block, with LS3 heads)
Vortech Procharger V2, Stock pulley 5-6 PSI
Kooks headers
3.5 inch magnaflow exhaust
50lb fuel injector
450LPH Walbro fuel pump
Cold air intake
AEM Fuel Pressure Regulator (return fuel style)
few other thins..