I've done everything I can to prevent enleanment, including changing the Fuel Cut Torque Ratio to all 1.0 and lowering the cat protection enleanment limit to 0.75, but the TR Command Fuel Enleanment still doesn't lock on to 1.0 even though the Clip does. See attachment.

The TR Spark Retard matches the TR Command Final, which matches the TR Spark Authority Clip. Spark TR is working as it should. So why then does the TR Command Fuel Enleanment drop below the TR Fuel Enleanment Clip, especially when my calibration shouldn't allow it?

TR spark.JPGTR enlean.JPG