-
Tuner
VVT information/tables
I noticed in the formula for the VE for the 2.4 cobalt motor that you need the cam angle for intake and exhaust and their values for each zone on the map in order to finish plotting the map.
Can we get all the cam controls unlocked in the programmer/editor...so we can turn it off or adjust turn on/zone map points and cam angles
Also can we get a way to track the position of each cam in the scanner?
Thanks,
Dan
-
Tuner in Training
Bingo. This is exactly what I was going to ask. We need either a way to log the actual angles, or at least an option to lock them.
-
Tuner
bump for the CSS.net crew!
-
Tuner
-
HP Tuners Owner
yes, it is in planning for the release after next