Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.
Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.
Only the ones that use the Bosch ME17.8.5 ecu.Originally Posted by DSoutlaw
Okay, makes sense. Thanks. Was doing some research and according to S3 power sports, there was a manufacturing change in November of 2020, and they don't offer ecu tunes for the mavericks after that manufacture date.
Only the RR uses the new ecu, all other models use the old ecu. So, if you buy one to mod, buy the lower one, so you can flash it.
Okay, thanks for the info.
Mine is a '21 Turbo R and built before Sept '20. So, I should be able to tune it.... correct?
Yes, if it has the Bosch ME17.8.5 ecu
Does anyone happen to know the model of the ECU that is replacing the M17.8.5 in the RR models? Can Am list their part number as 420464483, but I haven't been able to cross reference it to the Bosch number.
mg1ca920
2008 J2 F-350 CCSB
I wanted to offer my late MY2021 RR ecu (build date after Nov) is can-am partzilla number 420-464241 has bosch 0 261 S10 15G on the cover. i believe this to be the tricky one that is being tuned via boot/service mode tricks on the board. Hoping this will change eventually. Unable to find specifications or much detail of any kind about this ecu.
rotax_420464241_bosch_0261s1015g.jpg
Last edited by cyphers; 01-09-2022 at 02:41 PM. Reason: specifying model of vehicle
Supported now!
Eric Brooks
HP Tuners, LLC
FINALLY! Thank you!
Are these a VR or physical once the unlock is done?
Its a virtual read.
Eric Brooks
HP Tuners, LLC
Reply With Quote