So I am getting the power to 6700 rpm which I have dialed in. However it then coughs and will not shift into the next gear on wot. Attached is my tune. What table do I have to change to enable a shift on wot to happen? Attached is the tune.
Thanks
So I am getting the power to 6700 rpm which I have dialed in. However it then coughs and will not shift into the next gear on wot. Attached is my tune. What table do I have to change to enable a shift on wot to happen? Attached is the tune.
Thanks
I just read spool boys comment. "And that is what happens when you turn off torque management" in another thread. I will turn it back on and see if that does the trick.
Well I figured out my problem and I still have torque management all off.
On mine anyway the WOT shift table I thought was for shift rpm is for how fast it shifts so I had to go in the negatives instead of 6100 rpm.
So which tables did you change?
Just looked and see yours is totally different.
2006 ram 5.7 4x4
90mm throttle body
Comp thumper cam
Mild port and polish on heads
Full headers with off road y pipe 3? single exhaust
8 speed out of 19 ram thanks to Sound German
m112 supercharger