Results 1 to 3 of 3

Thread: Help, Wideband Reading in Lambada not in AFR

  1. #1
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Florida
    Posts
    47

    Help, Wideband Reading in Lambada not in AFR

    I have everything hooked up from the serial port and have it reading in hp tuners vcm scanner.

    Does anyone know why its reading in lambada and not in AFR my command is 14.63 gasoline.

    I tried searching came up with a few videos and posts but still not working, any help would be great Thanks.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Can you right click on the channel to change the units?
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Florida
    Posts
    47
    Yes I can, When I change it to Gasoline 14.7 AFR drop down box it goes to large numbers like 210. 250 .etc etc

    When its changed to Lambada drop down box, not sure if it is AFR but reads like 13.0 12.0 etc etc

    Are there anyother values I need to change in the math peramiters etc?