This is my setup atm . Running a 02 express van 0411. Started it up with a vats delete and idled like crap. New to tuning here. Can I make my t56 work with my setup on this type of pcm? I heard about segment swap but not sure exact details. I made my own harness from the 02 express van harness. Removed all wires transmission related and egr related ac etc. The ramjet intake I'm running has what I believe are 24 lb an hour injectors 17124187. I thought I could just change ifr to make it run a little better but did not work. Tried to find injector data for this with no luck, heard about the lt1s using these same injectors so I downloaded tunerpro and some lt1 files to retrieve injector data but data was different so I came to the conclusion that I will need to swap to some injectors that I can easily get data for. I picked up these common truck injectors 25317628 for cheap hoping I could use these. Any tips, tricks and suggestions welcome. Need someone to check my work .if im doing something wrong. Also wondering if im missing something as far as dissabling things in the ecm settings orimportant wires I might need that I may have left out. Thanks