engine dies on startup only when hot after tsp bald eagle cam install

[Z107]

i have a 2010 camaro ss that i just installed a bald eagle cam into my ls3 and i tuned idle a little bit to compensate but im having issues with starting the car when its hot. It will start the engine just fine rev up to 1300 rpm, then start dipping and raising from 500 to 1300. Any ideas on how i can either smooth this out or eliminate it completely?
Before.hpt

[cadillactech]

Do you have a log of what is going on?

What are the cam specs?

[Z107]

Ill grab a log when i get home from work.
As for the cam spec its 229/242. I threw away the spec card

[Z107]

Edit: found cam sheet,
Duration 0.50 229/242
Love lift 0.353 0.353
Valve [email protected] .600 .600
Lobe seperation 112
Intake center line 109

[Ben Charles]

I do these all the time, pm me if you would like for me to help

[Z107]

engine idle hot death.hpl

it occasionally stalls on attempt to start but sometimes tries to correct the underspeed