E80A Virtual Torque Logging/Tuning

[Sith]

Hey, I have a 2018 ltg camaro with a slightly larger turbo. I have spent alot of time on it and have slowly made progress. Combing through old forum posts about the torque based controls and believe I have hit an issue with virtual torque. A few people were all over it when HP released the VT tables but everything seemed to die off around 2019. I am at the point of trying to adjust the VT tables but I am wondering if there is a good way to do it accurately? Or any tips on how I should proceed with adjusting the VT? If there is a post somewhere I have missed that is ok too. I will keep digging away. Also there was alot of talk about missing tables in the editor that would allow us to essentially turn off the torque based system but they were never added, any idea why?

[Sith]

I think this applies to other ECUs of this generation, E78/E82/E whatever else. I believe I see this torque issue on V8 platforms as well.