Hello,
been chasing my tale here for the last couple weeks, i have an lt1 gen5 with a cam swap dod and vvt delete , after swap i was having issues with torque management retarding timing and shutting the throttle. after a couple adjustments i was able to figure out the timing issue and the engine runs decent, after logging a couple times we noticed that throttle is only opening 60%, no matter what i change in the virtual toq tables it still opens only 60%, i think the problem is form the max engine torque values. it looks like every time my cmd and actual torque goes over the max, which might be causing this issue , what table is the one that controls max eng trq? i already have the peak tq figured out. thank you in advance.
farouk map 1.2 virtual torque adjsuted (1).hpt21-11-25 16-56-29.hpl