2004 silverado force motor current

[04silverado6.0]

I am trying to get a little bit firmer wot shift on my 04 Silverado. I have raised the max pressure to 96 psi but i noticed the force motor current for the 90 and 96 column are the same. What amount of current should be put in the 96 column? I thought about trying 49mv but i didnt know what this would equal in real world pressure.

[RDF1]

I am trying to get a little bit firmer wot shift on my 04 Silverado. I have raised the max pressure to 96 psi but i noticed the force motor current for the 90 and 96 column are the same. What amount of current should be put in the 96 column? I thought about trying 49mv but i didnt know what this would equal in real world pressure.

You will need to add a pressure gauge to make sure the adjustments you make in the tune are adjusting the Pressure correctly.
I tweak the Force Motor Current a little but always have a 0-400 psi gauge to watch.
Post your tune and maybe someone can look it over. If it has high miles then it might be all it can do.

[04silverado6.0]

Here is my current tune file.

[RDF1]

Do you have a datalog?