Results 1 to 7 of 7

Thread: 2014 L83. need help getting a choppier idle if possible

  1. #1
    Potential Tuner
    Join Date
    Dec 2021
    Location
    Lexington KY
    Posts
    7

    2014 L83. need help getting a choppier idle if possible

    Hey everyone. new here. recently rebuilt my L83 with all new parts, including cam, lifters, springs, pistons. port work on the heads. everything. Had it tuned but dont like the idle. seems too fast. has a lope/chop to it, but seems fast. idles around 800 or so warm. What would be the best place to start on this? I can get a log and tune if needed. thanks in advance!!

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post tune and log if you want any support
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Potential Tuner
    Join Date
    Dec 2021
    Location
    Lexington KY
    Posts
    7
    here are both
    Attached Files Attached Files

  4. #4
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    well, there seems to be some corners cut on the tune and minimum timing is not factory which throws torque calc off
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  5. #5
    Potential Tuner
    Join Date
    Dec 2021
    Location
    Lexington KY
    Posts
    7
    heres a tune and log of the first tune I had in it. let me know what you think of it.
    Attached Files Attached Files

  6. #6
    Potential Tuner
    Join Date
    Dec 2021
    Location
    Lexington KY
    Posts
    7
    If any remote tuner wants to give my truck a stab at tuning, let me know and Ill email you directly. thanks! wanna get this thing right

  7. #7
    Tuner in Training
    Join Date
    Nov 2018
    Posts
    13
    Quote Originally Posted by KY6.2 View Post
    If any remote tuner wants to give my truck a stab at tuning, let me know and Ill email you directly. thanks! wanna get this thing right
    I can get you fixed up. If corners had been previously cut it will need to be done over and correctly to get the results you?re after