-
Tuner in Training
ZF8 MAET values
Just wondering if I'm moving in the right direction here. Appreciate the help!
I've looked at my recent 3rd gear pull log file to see what TQ values the ECM is seeing throughout the rev range, and adjusted the Maximum Available Engine Torque tables to exceed them slightly. Does this make sense to do, if the engine tq is higher then the original values?
There is a before and after in the attached SS based on the tabs 30605 and 30606. They were both the matching original values of 30605, and now they are the same values of the 30606 I modified.
Thanks!
MAET Compare.jpg
-
Tuner
The engine torque tables do not appear to have any effect