Good morning everyone,
I am looking for a solution to my problem. I am building an LSA supercharged 6.0L (LQ9) for my 1956 chevy bel air and I am having trouble deciding which way to go. I need to find an ECU that is compatible with a DBC 6.0L manual tune and 3 bar speed density OS. I currently have 3 blue green connecter ECU's but only one has IAC drivers and it is from an express van. so far the options I have read about include writing a 2004 GTO OS and changing all engine related tables to match the 6.0L, finding a matching manual OS and segment swapping the transmission data to go with the existing engine data, or swapping to a red/blue ECU and using a 2002 truck 6.0L standard tune. I have a few stock tunes pulled from different vehicles that I will include below. one is the truck tune I mentioned above, another is a newer truck that is manual but DBW as well as a 2004 gto file and the file from the escalade donor. I'm hoping someone can point me in the right direction. Thanks in advance!2002 6.0L nv4500 dbc as found tune.hpt
kinsmens 6.0.hpt
2004 gto dbc 5.7 manual tune.hpt
2005 escalade as found tune.hpt